|
Sandwich
Panel Air handling/ Fan Coil Units.
Sandwich
panel or double skinned units of modular construction and
built to prevent cold tracking, provide a clean surface inside
and out making these units attractive for use in applications
where "clean air" is required.
Due to
the 2 layers of metal casing, sandwich panel provides and
excellent barrier against break out noise.
Product
profile
- PANEL
- EXTERNAL 0.6mm CRP grade colourbond pre-painted steel.
INTERNAL expanded polystyrene is impregnated with a fire
retardant and is manufactured to Australian Standard AS
1366 Part 3-1992
- COILS
- Selected and manufactured to A.R.I.410 Copper tubes with
self spacing aluminium fins.
- FAN
- Forward curved centrifugal galvanised steel construction
mounted on solid mild steel shafts running in taper sleeve
ball bearings.
- Motors
are T.E.F.C. aluminium framed 3 phase 4 pole 50 Hz to IP55
class F insulation class B temperature rise.
- Motor
and fan assembly built with galvanised steel angle isolated
from casing by spring mounts and flexible duct connector.
- Drives
are first quality cast iron taper lock pulleys and matched
sets of A or B section vee belts.
- Bypass,
multizone and volume control dampers are 3.2mm aluminium
with rubber blade seals and stainless steel side seals.
- Filter
section (constructed as air handler) are available with
panel, V- form and extended surface area filters.
- Capacities
Air flow from 1,000 I/s to 30,000 I/s
Features
- Single
or multizone configuration
- 50mm
Polystrene foam sandwiched between colourbond sheet
- Aluminium
perimeter frame.
- Full
size hinged access doors.
- Stainless
steel drain trays installed to AS 3666.
- Vibration
isolated fan and motor assembly.
- TEFC
Motors.
- Taper
lock pulleys.
- Rippled
finned cooling and heating coils.
- Forward
or backward curved centrifugal fan.
- Complete
line of accessories.
- Filters,
Mixing Boxes, Bypass Dampers.
- Copper
Finned Coils, etc.
- Stainless
steel casings.
- All
internal components readily removeable.
- Multi-circuit
DX coils
- Protective
fin coatings
- Sectionalised
construction or complete knockdown.
|
 |
